Professional Monitoring for Any Studio.

Alesis has been creating studio monitors for over two decades, and, in that time, we’ve learned a thing or two about maximizing sound and sonic clarity. Elevate 6, a professional active studio monitor from Alesis, builds upon this time-tested technology by leveraging premium audio components with a response that can keep up with today’s music. With a high-quality reference monitor design, Elevate 6 helps you record, mix, listen, and create with confidence.


The Alesis Elevate 6 is an active, bi-amplified (50+25 Watts) studio monitor that delivers a flat frequency response, clear stereo imaging, and excellent bass transient response for professional mixing and monitoring. Equipped with a 6” woven Kevlar low-frequency driver, 1” natural silk dome tweeter, and precison-calibrated dual amplifiers, Elevate 6 delivers high-powered sound that stays accurate and clean across a wide frequency range. Its enhanced elliptical waveguides widen the sweet spot for consistent, stereo listening and enable you to make adjustments to your mix that translate perfectly to any playback system. Plus, the baffle radiuses were meticulously designed to reduce edge diffraction. The result is clean transparent sound that enables you to mix, accurately.


Elevate 6 comes with an onboard HF- and LF-trim switches, giving you a professional reference monitor setup that adapts to your production environment. With -2db, 0db, and 2db settings, you can quickly adjust Elevate 6 to fit the acoustics of any sized room or studio, especially when it's situated close to a studio wall. A balanced XLR+1/4" combo input and an unbalanced RCA input connect Elevate 6 to your favorite audio equipment. Elevate 6 is ERP-compliant and has an automatic shut-off feature that powers down the monitor when it's not in use.

Alesis is a registered trademarks of inMusic Brands, Inc., registered in the U.S. and other countries. Kevlar is a registered trademark of E.I. du Pont de Nemours and Company. All other product or company names are trademarks or registered trademarks of their respective owners.



Flat frequency response for accurate monitoring and mixing

75 Watt bi-amplified design (50+25) with active crossover

6" silver Kevlar low-frequency driver; 1" silk dome tweeter

Elliptical waveguides for a widened sweet spot

High-density wood cabinet with dual bass porting

Enhanced baffle radiuses reduce edge diffraction

(1) balanced XLR+1/4? combo input and (1) unbalanced RCA input

HF- and LF-trim switches with -2dB, 0dB, 2dB settings

ERP-compliant with power-saving auto shut-off


Frequency Response: 55 Hz – 30 kHz (+3 dB)

Frequency Range: 45 Hz – 35 KHz (-10 dB)

Crossover Frequency: 2.2 kHz

HF Trim: +2 dB, 0 dB, -2 dB above 3 kHz

LF Trim: +2 dB, 0 dB, -2 dB below 500 Hz

Low-Frequency Driver: Magnetically shielded 6.5" (16.5 cm) woofer with a Kevlar cone and a damped linear rubber surround

High-Frequency Driver: 1" (2.5 cm) silk-dome tweeter

Low-Frequency Amplifier: 50 W Class AB

High-Frequency Amplifier: 25 W Class AB

Maximum Output: 104 dB SPL (continuous), 110 dB SPL (peak)